The network camera PL-4NDC28 packs many critical video recording features. This CCTV camera is vandal resistant, providing protection against tampering of its functionality. Different frame rates allow you to set video recording settings as per your own requirements.
(5 / 5)
| Camera | : |
|---|---|
| Sensor | 1/3", 4 megapixel, progressive scan CMOS |
| Shutter | Auto/Manual, 1/6~1/8000s |
| Lens | 2.8 mm |
| Angle of View (H) | 109° |
| Day/Night | IR-cut filter with auto switch (ICR) |
| Min. Illumination | Colour: 0.02 Lux (F2.0, AGC ON) 0 Lux with IR |
| S/N | >55 dB |
| WDR | 120 dB |
| VIDEO | : |
| Max. Resolution | 2592 × 1520 |
| Video Compression | H.265/H.264, MJPEG |
| Frame Rate | 4MP (2592×1520): Max. 20 fps; 4MP (2560×1440): Max. 25 fps 3MP (2048×1520): Max. 30 fps; 1080P (1920×1080): Max. 30 fps |
| 9:16 Corridor Mode | Supported |
| ROI | Supported |
| Video Streaming | Triple |
| OSD | Up to 8 OSDs |
| Privacy Mask | Up to 4 areas |
| STORAGE | : |
| Edge Storage | IMicro SD, Up to 128 GB |
| Protocols | L2TP, IPv4, IGMP, ICMP, ARP, TCP, UDP, DHCP, PPPoE, RTP, RTSP, Qos, NTP, FTP, HTTP, SNMP, SIP |
| Compatible Integration | ONVIF, API |
| INTERFACE | : |
| Audio I/O | audio cable |
| Built-in Mic | Supported |
| Network | 10M/100M Base-TX Ethernet |
| GENERAL | : |
| Power | 12 V DC, or PoE (IEEE802.3 af) |
| Power consumption | 3.5W(5.5W with IR on) |
| Weight | 0.45 kg (0.99 lb) |
| Working Environment | -35°C ~ +60°C (-31°F ~ 140°F) |
| Humidity | ≤ 90% RH(non-condensing) |
| Dimensions (Ø x H) | Φ110 x 61 mm (Ø4.3” x 2.4”) |
| Ingress Protection | IP66 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||
